Grinding a concrete floor before finishing work

[zihadhosenjm40]

All existing gaps between the boards must be sealed with a special wood mastic. It is inexpensive and can be purchased at any hardware store.

Concrete screed and the nuances of working with it
It is much easier to work with concrete screed. Smooth and non-critical differences in floor level can be left. But small and sharp ones can become a problem. In this case, the bumps need to be bc data europe down, and deep holes filled in. After the floor is slightly leveled, it is carefully swept. It is also a good idea to wash it with water to remove dust and small stones. This is especially important if you plan to fix the linoleum to the floor with glue.

PHOTO: svouimirukami.ru

Laying linoleum on ceramic tiles
Let's make it clear right away that if possible, it is better to dismantle the tiles. If there is no such possibility, then laying linoleum on such a surface is quite acceptable. It is only necessary to seal all the seams, leveling them with the floor, and also to correct other existing defects, such as chips and cracks. After that, you can safely lay the covering.

All seams must be leveled with the tiles before laying the linoleum
PHOTO: uchi.kz

Laying the covering on old linoleum: how to prepare the surface
This is probably the easiest option for laying flooring. In this case, there is no need to lay a base. But another problem may arise here - the linoleum will be too soft, which will lead to noticeable dents under the furniture legs. This point must be taken into account.

Important! Before laying a new covering, all defects on the old one must be eliminated. Existing cracks are coated with silicone sealant and leveled. The same must be done with the separated seams.