Before installing such gables on the attic floor,

[zihadhosenjm40]

it is necessary to install a template of the structure being erected. It is made from bars. It is much easier to understand the sizes of the logs and their trimming using a template. The installation of logs is carried out in the form of a pyramid. Each subsequent log should be made shorter than the previous one.

The construction of such structures has several features. For example, on each of the end walls, the gable structures should be laid simultaneously. This condition is mandatory, since the end parts of the roof are connected to each other with beams. They are laid on the edges of the pyramids. For this purpose, special semicircular grooves must be cut in the beams.


If the distance between the gable structures is more than 6 m, the beams must be made of two logs connected to each other. They are joined lengthwise on the inner wall of the house. The beam located highest of all connects the tops of the gables. It is called the prince's beam. The ridge girder will rest on it. The remaining beams are supports for the rafters.

When the construction of the side roof elements is completed, it is necessary to mark the cut. It should be done tangent to the upper logs. For this purpose, it is recommended to use a painter's cord. It is stretched between the lower row beam and the prince.


A design can be made in which the first rafter beam is mounted inside the attic. In this case, the gable overhang is not designed at first. It is equipped only after the entire roof is built. However, another senegal mobile database can be chosen. It involves extending the first rafter beam beyond the end part of the roof. It becomes the frame of the overhang.

In both cases, to secure the rafters more rigidly, special semicircular grooves must be cut into them. They are called cups. It is important to remember that you can only work with logs if you have sufficient carpentry experience. Otherwise, the process may go wrong, which is fraught with unreliability of the structure.


Overhang
A gable overhang is always installed above the end part of the roof. It is necessary to protect the walls from precipitation. Such a structural element can be arranged in different ways. It has different widths, which often reach half a meter. In any case, to create a strong overhang, you should make a reliable connection of this part of the roof with the rafter system. To understand how to make a canopy over the gable of the roof, you should understand how it is arranged.

The overhang design must be decided upon before the design of the roof structure begins. This is explained by the fact that in the process of performing such work, many problems can be encountered.