The carriages are stuffed onto the comb with tow

[zihadhosenjm40]

A window carriage is a vertical beam measuring 15x10 cm, at the ends of which 5x5 cm cutouts are made - horizontal crossbars, 15x15 cm boards with tenons at both ends, are inserted into them.

Installation procedure:
the lower lintel is laid
the upper crossbar is inserted into the upper gap and lowered into the grooves
the resulting structure is fastened with screws, without capturing the ridge (!), otherwise there is no point in installing the casing. The gaps between the logs and the casing are foamed (filled with tow).
Window installation begins with the installation of the window sill:
To ensure that the window sill is securely fixed, shallow (5-10 mm) grooves are cut into the wooden opening
using plates (plastic or wooden) and a level, level the window sill
fix the window sill with screws. To prevent fantuan data plastic window sill from cracking when the screw head is screwed in, put a rubber (washer) gasket underneath. The holes for the screws are drilled in the places that will later be covered with a plastic window.
Advice! In a wooden house, it is best to install a window either in the middle of the wall or slightly shifted to the outside, but not right next to it!

After this, they begin installing the PVC window:
prepare the window (remove the glass units and sashes)
using blocks, align the frame horizontally
The window is secured with anchors at the top and sides
foaming
After the frame is installed and checked horizontally and vertically, the double-glazed windows are inserted and closed with glazing beads, after which the sashes are inserted and the fittings are adjusted. All gaps between the opening and the frame are foamed, the gap between the window sill and the frame is best filled with silicone sealant.

The procedure for installing a metal-plastic window in a wooden house is presented in detail in the video