After completing the electrical installation work, check the correctness of the work done by visual inspection and measuring the resistance with a multimeter. If everything is in order, you can turn on the circuit breakers and use electricity in the bathhouse or wooden house.
This is the technology for installing retro wiring yourself. As you can see, there is nothing complicated, the main thing is to be careful and follow the simple rules that we have provided. Please note that you should not install vintage wiring outdoors, as this requires special sockets and switches with a high degree of external protection from moisture and dust. The only place where you can install retro wires outdoors is in a closed wooden gazebo, and only if all electrical safety measures are observed.
Expert advice
Materials for retro wiring
Wires
What is a textile cable (aka retro cable)? It is a two-core engineer data three-core copper electric wire, packed in PVC insulation, then covered with a colored textile braid or fiberglass strapping. Two-core wires are usually used for lighting. Three-core wires are used for wiring (since the third core is intended for grounding).
The wire cross-section diameter is available in three variations:
0.5 - 0.75 - maximum power - 2.9 kW.
1.5 — maximum power 4.4 kW.
2.5 - maximum power approximately 6 kW.
In the video, the master clearly explains how to install electrical wiring on insulators:
-
zihadhosenjm40
- Posts: 521
- Joined: Sat Dec 21, 2024 3:33 am