From the boards
Several options for how to make high beds from boards were in the photo above. The main snag is usually in the connection at the corners. The easiest way is to overlap them: just put one next to the other at 90° and nail them through. But there are aesthetes who strive to do everything correctly. And the correct way is to saw two boards at an angle of 45° and connect them like that. This is the option that will be demonstrated in the photo.
The boards are planed and treated with an impregnation to slow down rotting.
To make it convenient to fix the fence to the ground, vertical croatia mobile database or pieces of board are nailed in at intervals of 1.2-1.5 m, the length of which is approximately 20 cm longer than the selected height of the bed.
The lower end of the block or board needs to be sharpened - this will make it easier to hammer the fence into the ground. Then take a miter box or circular saw and cut the edges at an angle of 45°. Putting two boards together gives you a perfect 90° angle.
A properly made angle
For a strong connection, we install a block on the inside of the corner, to which we nail the boards.
This is what happened. Only it lies with its "loads" facing upwards. They are driven into the ground
It doesn't take long to make a fence for raised beds out of wood, but it's even easier to join the boards end-to-end and nail metal corners for strength (pictured below).
The simplest option
From logs
It is not more difficult to make a similar box from hewn logs. For example, this option: two long sides from logs, and short ones from pieces of boards.
The advantage of logs is that they are heavy and due to their weight they will hold the soil well.
We nail vertical bars so that the box
-
- Posts: 521
- Joined: Sat Dec 21, 2024 3:33 am