Important stages of construction

[zihadhosenjm40]

crushed stone;
cement;
edged and unedged boards measuring 40*150 mm;
beam 100*100 mm;
roofing felt;
waterproofing film;
ondulin;
galvanized screws and corners;
nails;
river 25*25 mm;
antiseptics, fire retardants for wood;
varnish.
When purchasing lumber, you need to consider that its india car owner data length is 6 meters. Correct calculation of the required amount of raw materials will help save money.

You can make such a simple garden structure in the shortest possible time without outside help. The main thing is to follow the recommendations of experienced builders and correctly draw up a design drawing.


Preparation and laying of the foundation
To pour a high-quality foundation, you will need to do the following:

Level and clear the area of ​​debris and vegetation.
Mark out the area according to the design using string, pegs and a tape measure.
Mark the places where the foundation pillars will be installed. There should be at least 6 of them.
Calculate the amount of concrete, taking into account the size of the pillars and the depth of their installation.
In the marking areas for the posts, make holes 60 cm deep.
Make a formwork 25*25 cm, no more than 20 cm high. Edged boards are suitable as material.
Fill the resulting holes with crushed stone and sand and fill with a viscous cement mortar.
After pouring, check the evenness of the tops of the posts with a building level.
In this form, the foundation must be left to stand for a week until it is completely dry.

Erecting the frame and laying the floor
While the base is gaining strength, it is worth starting to make the frame parts. The boards can be sawn in advance and run over with a plane.