We remove the casing of the walk-behind tractor.

[zihadhosenjm40]

Replacing the belt
Owners whose Krot MK 1A motor cultivator breaks the belt should replace the damaged belt with a new one as follows:

We remove the belt from the large wheel.
We loosen the accelerator bolt, which prevents the belt from being removed completely.
We remove the old belt.
The new belt is placed on the small pulley, after which the accelerator bolt is tightened.
We put the belt on the large pulley at the top of the structure.
Carefully turn the wheel until the belt is completely put on.
We install the cultivator casing in place.
Now you know how to replace the belt yourself, and if necessary, you can easily do it yourself.

This is interesting: characteristics of the Krot MK 2 nigeria mobile database cultivator.



Please note: If the new belt is loose and vibrates excessively during operation, press down on the accelerator plate. This should correct the problem.

Now you know the main reasons for the failure of walk-behind tractors of this manufacturer, and how to start the Krot motor cultivator if necessary. This approach is possible due to the simple design of the unit. However, independent repair is not suitable for everyone, and in case of doubt or uncertainty, do not hesitate to seek help from specially trained people. In most cases, they will do the repair better and faster. If you do not trust others and rely only on your strength, you will need a little attention, and everything will work out. Experienced owners advise recording all actions when disassembling the unit for the first time, so that if necessary, you can restore the entire sequence of actions and not get confused during assembly.