A plank fixed to a fence made of corrugated sheet metal

A comprehensive repository of Taiwan's data and information.
Post Reply
zihadhosenjm40
Posts: 521
Joined: Sat Dec 21, 2024 3:33 am

A plank fixed to a fence made of corrugated sheet metal

Post by zihadhosenjm40 »

How to attach a strip to a fence made of corrugated sheet metal
Attaching a strip to a fence made of corrugated sheeting is a very simple task, especially if you have previously installed the profiled sheeting yourself.

First, take measurements. If the fence is solid, then simply divide its length by 1.95 - this is the length of the U-profile, taking into account the 5 cm overlap. If the support posts divide the fence into separate sections, then try to buy a fence strip for corrugated sheeting with a length equal to the length of the section. Unfortunately, many suppliers only sell standard components with a length of 2 m. In this case, take into account not only the overlap, but also the waste that will appear during trimming.


The next stage is the installation itself. Before fixing the peru mobile database to the fence made of corrugated sheet, clean the top of the corrugated sheet from dirt. Otherwise, the grains of sand under the metal will work like sandpaper, scratching and abrading the protective coating of the sheet. Then put the U-profile on the sheet and fix it every 30 cm with roofing screws with a rubber washer, which are used to attach the metal profile. The strips are connected to each other with an overlap of 5 cm or with the same screws or rivets.

What's the bottom line?
A decorative overlay on a fence made of corrugated sheeting is the finishing touch when building a fence made of corrugated sheeting. You can do without it, but you shouldn’t: it protects the edge of the metal profile from moisture, gives the sheeting greater rigidity and makes the fence complete by creating a correct rectangular silhouette.

There are at least four types of end strips for a fence made of corrugated sheets. Try to choose a profile of such a shape that water and snow do not linger on it, and precipitation flows down the canopy.

It is very easy to install a strip on a corrugated fence. It is put on a clean sheet and fastened with screws with a small overlap.

Useful article? Save it on social networks so you don't lose the link!
Post Reply