How to apply a vinyl sticker to a car yourself?

[zihadhosenjm40]

In the places where the material is bent, warm it up with a hair dryer, and apply a primer to the edges, on the side of the adhesive base;
if unevenness appears on the bend, heat it a little more;
After applying the film, the entire surface is heated for better adhesion and to get rid of some imperfections.
When applying the dry method, the application process is repeated, the bahrain mobile database being that the material is applied to a dry surface of the body. After application, the carbon coating is heated. The surface is passed over with a felt squeegee, wiped with a dry napkin or cloth.

Do not heat above 70 degrees to avoid color loss and destruction!

When applying, pay close attention to the fact that the material is not stretched too much and bubbles do not form. If this happens, it is recommended to press the unfinished area with a wet cloth and treat it with a hot air stream. The vinyl should shrink a little, the defects will be hidden.

After application, it is not recommended to wash the car or drive at high speed for 10 days. This time is necessary for the material to dry.

We recommend watching this video before starting work:

In conclusion
In order for the work to be done qualitatively, the material of the corresponding quality is selected. You need to be attentive to each stage of preparation and gluing of your car.

Chery M11 <<PININFARINA>> ›
Logbook ›
How to properly apply a vinyl sticker to a car yourself?
How to apply vinyl to a car with your own hands